Description
B2 Powersports Series H4 LED Replacement Bulb. The ODX high-performance B2 Bicolor LED bulb is the smartest LED designed for snowmobiles and ATV. The bulb is featuring a powerful DEEP YELLOW LED light on the low beam and see it turn white on the high beam. Don’t get blinded in trails during snow storms or when you follow your companions. The yellow light penetrates deeper through the snow and fog and will guide your way without creating a blinding white wall of snow. It is designed with a built-In ballast and without any moveable parts. It is comparable to 3000 lumens per bulb. Because of his fanless and no ballast design, it can be submerged in water, mud or snow. For these reasons, it’s the most recommended product for Snowmobile, ATV and Side by Side. It is only available in H4 or H13. EASY TO INSTALL IN LOW & HIGH BEAM OF YOUR SNOWMOBILE. THE LED DRIVER IS INTERNAL ON OUR B2 LED BULB AS THERE IS NO OTHER PIECE ATTACHED ON THE WIRE. THE HIGH QUALITY THERMOFORMED PLASTIC CONNECTORS ARE SECURELY ATTACHED TO THE WIRE AND WILL NOT BREAK APART. THE HEAT GENERATED BY THE LED CHIPS IS DISSIPATED IN THE ALUMINIUM HEAT SINK AT HIS BASE. THE B2 LED KIT DOES NOT HAVE ANY MOVING PARTS TO REDUCE THE RISK OF FAILURE. THE BULB IS FEATURING A POWERFUL DEEP YELLOW LED LIGHT ON THE LOW BEAM AND SEE IT TURN WHITE ON THE HIGH BEAM. DON’T GET BLINDED IN TRAILS DURING SNOW STORMS OR WHEN YOU FOLLOW YOUR COMPANIONS. THE YELLOW LIGHT PENETRATES DEEPER THROUGH THE SNOW AND FOG AND WILL GUIDE YOUR WAY WITHOUT CREATING A BLINDING WHITE WALL OF SNOW. INSTALL WITHOUT ANY MODIFICATIONS. THE LED BULB IS ADJUSTABLE 360 DEGREES TO ALLOW THE LIGHT BEAM TO AIM HORIZONTALLY AND CREATE A STRONG PROJECTING LIGHT BEAM PATTERN. THE IGNITION OF THE CHIP IS IMMEDIATE ONCE TURNED ON SO THERE IS NO NEED TO WARM THEM UP IT AS THE HID. ENTIRELY DESIGNED IN AEROSPACE GRADE ALUMINUM. COMPARABLE TO 3000 LUMENS PER BULB. 100% WATERPROOF, RESISTANT TO MUD, SNOW, SHOCKS, VIBRATION AND DUST. CAN TOLERATE WEATHER CONDITIONS FROM -40C UP TO + 80C. DEEP YELLOW 3000K ON LOW BEAM AND COLD WHITE 6500K ON THE HIGH BEAM. PROJECT A HORIZONTAL LIGHT BEAM ON THE ROAD AND WHEN INSTALLED CORRECTLY, THEY WILL NOT BOTHER DRIVERS IN THE OPPOSITE DIRECTION.
