(available at Southside only)
Before we clean, cut, polish and wax a vehicle; we always assess the paint condition and look for any imperfections that need touch ups (chips, swirls, dents, etc). Once the vehicle has been surveyed, we thoroughly wash the vehicle with soap and water to remove any dust, contaminates or bug debris. If needed we use a special chemical to remove these contaminates that is paint safe. We then rinse and dry the vehicle. Degreasing the engine and giving it a rinse will also occur during this process. If further detailing is required under the hood, we get into those hard to reach areas for a showrooom shine.
Once the vehicle is dry, we tape off all areas of the vehicle that will not be addressed (rubber seals, fenders, any other plastic areas). We begin with a chemical stripping of the paint to release all foreign contaminants that have embedded themselves into the clear coat. We then use a cut compound with a power polisher to bring the paint back to a shine. A sealant is then applied and the vehicle is then buffed to a shine.We remove the tape, apply a coat of wax and hand buff the paint to further enhance the shine. We only use quality products from reputable vendors.
For each vehicle, we assess every detail of the interior. We look at the stain severity and any other problem areas that may require extra attention. Then we remove all loose objects within the vehicle and box them for the owner. We remove all floor mats and thoroughly vacuum the floor carpet, seats and headliner. Afterwards we steam clean all clothed areas with our Anti-Bacterial Steam Cleaner. The vehicle is then left to air dry. After that, we wipe down and detail the dashboard, door panels and other plastic/leather wrapped areas. We wipe down and air chuck all these spots and follow up with dusting of interior cleaner to make things sparkle. Lastly, we clean all glass inside and out.
